Thursday, December 29, 2011

error: PAM: authentication error for root from xxx.xxx.xxx.xxx

Hi,

I recently installed freebsd 8.2 on my lap, its very good experience using this OS. I had simple issue after installation. While doing ssh to FreeBSD installed on vmware I came up with above error.

Which clearly states that issue is with authentication , which we need to configure in ssh service.

We need to add below three options in /etc/ssh/sshd_config

PermitRootLogin yes 
PasswordAuthentication yes 
AllowUsers root


Thats it, we are done , now we can ssh to FreeBSD installed in vmware, one common mistake I did ,was adding these above lines in /etc/ssh/ssh_config.

So there are 2 files in /etc/ssh/ directory i.e /etc/ssh/ssh_config & /etc/ssh/sshd_config


We are suppose to configure above 3 options in sshd_config  then only it will work like charm!

Regards,
Girish

Monday, December 19, 2011

Determining IP Information for eth0... failed; no link present. Check cable?

Hi,


While working on RHEL5 installed on VMWARE I got this error restarting network service.

Little bit around 1 min I noticed that Ethernet option for VMWARE is off !!! that's the reason RHEL5 thrown this error.
 










Regards,
Girish

Sunday, December 18, 2011

httpd-2.2.3-31.el5.i386: Cannot find a valid baseurl for repo: Server

Hi All,


Actually its very basic mistake, in such type of errors if you have http repository setup, check once if http url is accessible from client or not.


If not accessible the probably problem with http service, but if accessible then ? ? ? ?

Then problem was very simple, it was wrong baseurl in /etc/yum.repos.d/yumconf.repo file

Here is sample of wrong configuration :

[root@station2 ~]# cat /etc/yum.repos.d/yumrepos.repo
[Server]
name=Red Hat Enterprise Linux $releasever - $basearch - Debug
basurl=http://192.168.152.130/Server
enabled=1
gpgcheck=0
#gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release

Error was quite simple, instead of "baseurl" it is "basurl"

Correct it and your problem will be solved quickly!!!

Regards,
Girish







Friday, August 12, 2011

Linux QRTask Commands

Hi,

Those who working as a linux administrator may have came across Quarterly Review Task (QRTask).
Its gathering of information about server after every 4 months. We generally perform QRTASK's its very easy to do, and here are few of important commands used for QRTASK :

You can save below lines as shell script with .sh extension :
-----------------------------------------------------------


echo ---------------------------------------
echo "Server Name"
echo ---------------------------------------
hostname

echo ---------------------------------------
echo "Server Model"
echo ---------------------------------------
dmidecode | grep -m1 "Product Name"

echo ---------------------------------------
echo "System Firmware Revision"
echo ---------------------------------------
dmidecode -s bios-version

echo ---------------------------------------
echo "OS Type"
echo ---------------------------------------
uname -a


echo --------------------------------------
echo "HBA"
echo --------------------------------------
lspci |grep -i -e fib -e hba

echo ---------------------------------------
echo "OS Backups"
echo ---------------------------------------
cat /proc/mdstat

echo ---------------------------------------
echo "System INformation"
echo ---------------------------------------
dmidecode -t system


echo ---------------------------------------
echo "BIOS Information"
echo ---------------------------------------
dmidecode -t bios

echo ---------------------------------------
echo "Processor INformation"
echo ---------------------------------------
dmidecode -t processor





echo ---------------------------------------
echo "CPU information"
echo ---------------------------------------
cat /proc/cpuinfo
           
echo ---------------------------------------
echo "MEMORY-USAGE"
echo ---------------------------------------
cat /proc/meminfo  

echo ---------------------------------------
echo "SWAP"
echo ---------------------------------------
swapon -s

echo ---------------------------------------
echo "I/O throughput"
echo ---------------------------------------
iostat




echo ---------------------------------------
echo "Disk Space"
echo ---------------------------------------
df -h

echo ---------------------------------------
echo "FIRMWARE REVISION"
echo ---------------------------------------
dmidecode --type bios




echo ---------------------------------------
echo "NETWORK INTERFACES"
echo ---------------------------------------

ifconfig | grep eth


echo ---------------------------------------
echo "NETWORK-INFORMATION"
echo ---------------------------------------

ethtool eth0;ethtool eth1;ethtool eth2;ethtool eth3


echo ---------------------------------------
echo "PATCH-LIST"
echo ---------------------------------------
rpm -qa>rpm.txt

echo ---------------------------------------
echo "User List"
echo ---------------------------------------
cat /etc/passwd



This information is then documented for official purpose.

Thanks & Regards,
Girish...

Tuesday, August 9, 2011

NFS Automount issue in Office

Hi ,

This posts are not for advanced users as they all know these common issues.
I came across this issue regarding NFS automount in my office.
I checked o/p of : df -h but nfs share was not shown in o/p

We though that issue might be from Server end d wanted to check nfs server side , but one thing I didn't know was when we perform AUTO-MOUNTING of NFS share , unless user request for share it is not mounted on specified directory , and that is why client tool was generating message like "share XXX not mounted on XXX"

Finally we suppressed that alarm and now its working fine. :)

Thanks & Regards,
Girish...